Auto Finesse One Step Compound (250ml & 500ml)

All-in-one car detailing paint correction compound

A staple part of a truly thorough car detailing journey is the paint correction process, which can often involve using a number of different products to get the job done. This is where Auto Finesse One Step Compound comes into its own. Specially engineered to be used with a Dual-Action Machine Polisher, One Step Compound offers a cutting level of medium to coarse and finishes down to a near-perfect result.

Initially it performs as a heavy cut compound, using abrasives to then break down into a refining polish, all in one. This means you can effectively restore paintwork and remove swirls in a single stage. Auto Finesse One Step Compound doesn't contain any fillers or unnecessary additives, the resulting finish at the end of the process, is the true finish.

Features & Benefits:

• One step cutting & finishing compound
• Offers medium to coarse cutting power
• Provides a 'true finish'
• Specially designed for use with a Dual Action Machine Polisher
• Contains diminishing abrasives
• Ideal for quicker results when you are not looking to spend more than two days machine polishing

Directions for use:

• Ensure the intended car for polishing is thoroughly cleaned and prepared
• Add three spots of the One Step Compound to the pad
• Flip the machine polisher onto the paintwork
• Adjust the machine to the lowest speed setting and turn on, spreading the product out over a 2sq. ft area
• Set the DPX to speed 4 and turn the machine on, adding a gentle amount of downward pressure, using a crosshatch motion, snake down the area from left to right and then right to left
• Ensure to perform this stage twice over
• Go back to the panel that still has product on and adjust the machine polisher speed to 3
• Repeat the cross hatching twice over
• Buff the product off to a gleaming finish

Sizes: 250ml & 500ml (Select from drop down menu above)

Material Safety Data Sheet (MSDS)